Your cart is currently empty!
Arduino Nano v3
35 $
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3
Description
Description
Attention
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
Technical specifications
| Microcontroller | ATmega168 or ATmega328 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12 V |
| Input Voltage (limit) | 6-20 V |
| Digital I/O Pins | 14 |
| PWM Digital I/O Pins | 6 |
| Analog Input Pins | 8 |
| DC Current per I/O Pin | 40 mA |
| Flash Memory | 16 kB (ATmega168) or 32 kB (ATmega328) |
| Flash Memory for Bootloader | 2 kB |
| SRAM | 1 kB (ATmega168) or 2 kB (ATmega328) |
| EEPROM | 512 bytes (ATmega168) or 1 kB (ATmega328) |
| Clock Speed | 16 MHz |
Resources
ECCN/HTS
| HSCODE | 8543909000 |
| USHSCODE | 8543708800 |
| UPC | 841454112037 |
| EUHSCODE | 8543709099 |
| COO | ITALY |
Technical Details
Technical details
| Dimensions | 0mm x0mm x0mm |
| Weight | G.W 12g |
| Battery | Exclude |
Related products
Arduino Uno Rev3 Development board and Arduino beginner programming
45 $
Arduino UNO Rev4 Minima, 32-bit microprocessor, Arm® Cortex®-M4, 12-bit DAC, CAN BUS, and OP AMP, 6-24V, SWD connector, HID support
35 $
Arduino Nano ESP32 – ESP32S3, Wi-Fi, Bluetooth, 14x digital I/O, 8x analog input, 5x PWM, 2x UART, 1x IIC, 1x SPI, support MicroPython and Arduino
35 $
Reviews
There are no reviews yet.